静电喷枪枪体的保养
Maintenance of electrostatic spray gun body
1、喷枪要经常保持清洁，清洗时不可将枪体浸泡于溶剂中，要手持喷枪，用柔软的毛刷和抹布沾溶剂小心清。
1. Always keep the spray gun clean. Do not immerse the gun body in the solvent when cleaning. Hold the spray gun in hand and clean it carefully with a soft brush and rag stained with the solvent.
2、除故障外不可随便分解，为确保枪体的缘源，分解只限于因故障而更换零件。
2. It is not allowed to decompose casually except for faults. In order to ensure the edge source of gun body, the decomposition is limited to the replacement of parts due to faults.
3、喷枪应经常悬挂于挂钩，短时间内不使用时，也要关闭控制箱电源。
3. The spray gun shall be hung on the hook frequently. When it is not used in a short time, the power supply of the control box shall also be turned off.
4、为了是喷枪亲量化，枪体使用树脂材料，设计上充分考虑了强度，但使用时扔要注意不摔落，以免造成不必要的损害。
4. In order to quantify the spray gun, the resin material is used for the gun body, and the strength is fully considered in the design. However, when using the spray gun, attention shall be paid to not falling, so as to avoid unnecessary damage.