| 最好每天工作完后进行润滑喷枪 |
| 添加时间：2019/11/23 15:29:38 浏览次数： |
| 最好每天工作完后进行润滑喷枪，用轻机润滑的各部件。由于正常的磨损和老化，密封圈、弹簧、针阀和喷嘴必须定期更换。更换应按生产厂家的说时进行。由于机油过量就会流入涂料和机油通道，造成喷涂缺陷，因此润滑时必须非常小心，机油和涂料混合后就会降低喷涂质量。 It is better to lubricate the spray gun after working every day, and lubricate all parts with light machine. Due to normal wear and aging, seal rings, springs, needle valves and nozzles must be replaced regularly. The replacement shall be carried out according to the manufacturer's instructions. Because too much oil will flow into the paint and oil passage, resulting in spraying defects, therefore, great care must be taken when lubricating, and the spraying quality will be reduced when the oil and paint are mixed. |
| 上一页 静电喷枪雾化不良解析之使用不当的清洗工具 |
| 下一页 静电喷枪涂料雾化装装置为负电极 |
Copyright © 技术支持：遨游网络