返回首页

河北静电喷枪厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
静电喷枪枪体的保养
添加时间:2020/8/21 15:42:31     浏览次数:
静电喷枪枪体的保养
Maintenance of electrostatic spray gun body
1、喷枪要经常保持清洁,清洗时不可将枪体浸泡于溶剂中,要手持喷枪,用柔软的毛刷和抹布沾溶剂小心清。
1. The spray gun should always be kept clean. Do not immerse the gun body in the solvent when cleaning. Hold the spray gun in hand and clean it carefully with a soft brush and cloth.
2、除故障外不可随便分解,为确保枪体的缘源,分解只限于因故障而更换零件。
2. In order to ensure the edge source of the gun body, the decomposition is limited to the replacement of parts due to failure.
3、喷枪应经常悬挂于挂钩,短时间内不使用时,也要关闭控制箱电源。
3. The spray gun should always be hung on the hook. When not in use for a short time, the power supply of the control box should also be turned off.
4、为了是喷枪亲量化,枪体使用树脂材料,设计上充分考虑了强度,但使用时扔要注意不摔落,以免造成不必要的损害。
4. In order to make the spray gun more friendly, resin material is used for the gun body, and the strength is fully considered in the design. However, care should be taken not to drop when using the gun, so as to avoid unnecessary damage.
上一页  没有了  
下一页  静电喷枪的组成
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3