| 静电喷枪的使用方法 |
| 添加时间：2017/9/19 17:16:49 浏览次数： |
| 掌握一种适合的自己的喷涂方法可有效提高喷涂效率减轻劳动疲劳。 Mastering a suitable spraying method can effectively improve spraying efficiency and reduce labor fatigue. 喷枪喷涂的方法主要有四种，分别是横向喷涂法、纵向喷涂法、纵横交叉法。和横纵双重法。 There are four main ways to spray guns. They are horizontal spraying method, vertical spraying method and vertical and horizontal crossing method. Horizontal and vertical double method. 横向喷涂法的喷涂图样呈直状，右手掌握喷枪，从操作者左上侧开始，搬动扳手，从左向右进行。当行至一个接面的距离时，迅速向下向左往返进行。接面可根据涂料品种自行掌握。当喷完一个面积时再顺序喷另一个面。 The spray pattern of the horizontal spraying method is straight, and the right hand grasps the spray gun. Starting from the left side of the operator, the wrench is moved from left to right. Go to a junction when the distance between the left down quickly. The surface of the coating can be mastered according to the paint variety. When one area is sprayed, the other surface is sequentially sprayed. 纵向喷涂法和横向喷涂法相似，只是喷枪嘴图样忙改为水平方向，喷枪从左上方或右上方往下往返运行。也可以从右下方或左下方往上往返运行。 The vertical spray method is similar to the horizontal spray method, but only the spray nozzle pattern changes to horizontal direction, and the spray gun runs from the top left or the upper right. You can also run up and down from the bottom right or bottom left. 使用纵横交叉法喷涂时第一遍纵向往返喷涂，第二遍时横向往返喷涂，每遍都要改变图样的方向。 Use vertical and horizontal crossing method, spray the first round and back spraying, second times, horizontal and back spraying, each time to change the direction of the drawing. 横纵向双重法。喷涂方向不变，第一遍喷完后，再按原来的方法喷涂。 Double longitudinal method. Spray direction unchanged, after the first spurt, and then spray the original method. |
| 上一页 喷涂需注意的几点问题 |
| 下一页 静电喷枪喷涂之安全管理 |
Copyright © 技术支持：遨游网络