静电喷枪喷涂之安全管理_新闻动态_静电喷枪,液体静电喷枪,自动静电喷枪-河北厂家价格

新闻动态

当前位置：网站首页 > 新闻动态 > 详细信息

静电喷枪喷涂之安全管理

添加时间：2017/9/16 17:13:58 浏览次数：

1，高压静电发生器必须要接地线：
1, the high-voltage electrostatic generator must be grounded:
高压静电发生器接地线是安全作业基本，静电喷枪的地线也取自高压静电发生器，所以应确认着实接地。
The grounding line of the high-voltage electrostatic generator is the basic of safety operation. The ground wire of the electrostatic spray gun is also taken from the high-voltage electrostatic generator, so it should be confirmed that the ground is grounded.
2，被涂物要总保持接地状态：
2, always keep the ground in the coating:
被涂物一般由输送机接地，但吊具的接触部分如有涂料附着时会使导电不良，被涂物带电，易发生火花，成为火灾的原因；因此要定期实施吊具附着涂料的清除。
The object to be coated by conveyor grounded, but as part of the spreader contact when the conductive coating layer, the coated charged, prone to spark, become the cause of the fire; so regularly clean paint sling attachment.
3，涂装室内的金属物体要全部接地：
3, all the metal objects in the coating room should be earthed:
涂装室内因高电压使喷涂机周围的空气离子化，不接地的金属物体带电后有发生火花的危险；因此在涂装室内的喷涂机安装台或安全栅等金属物质要确实连接地线。另外不使用的涂料罐、工具等金属物体请勿放置在涂装室内。
Indoor coating because of the high voltage ionizing air spraying machine around the metal objects charged ungrounded after dangerous spark; therefore it connects in painting indoor spraying machine to install a security fence or other metal material. In addition, do not use paint cans, tools and other metal objects, please do not put in the paint room.
注意：接地是静电安全最重要的一个方面，所有导电项目都需要接地。
Attention: grounding is the most important aspect of electrostatic safety. All conductive items need to be grounded.
4，作业时要空手操作静电喷枪：
4, the operation should be empty handed electrostatic spray gun:
静电喷枪的握把部分经控制箱接地。尽管如此，如带手套作业人体也会带电，如接触其他接地物体会受到电击；所以带手套作业时，手掌部分要开一个洞。
The grip part of the electrostatic spray gun is connected to the ground through the control box. Even so, as with gloves, the human body will be electrified, such as contact with other ground objects will be subject to electric shock; so with gloves, the palm part of the work to open a hole.
5，作业时要穿皮底鞋或静电鞋：
5, to wear leather shoes or anti-static shoes when working:
涂装室周围的空气离子化，如穿橡胶底或合成树脂底的鞋，人体也会带电，接触接有地线的安全物体时会受到电击；从事静电喷涂作业时为使静电不能滞留，须穿用静电鞋并要经常注意勿使涂料块附着在静电鞋上。
The ionized air around the coating chamber, such as bottom wear rubber or synthetic resin shoe, the body will live, contact with the ground when the security object received an electric shock; in the electrostatic spraying operation to make static electricity can not be stranded, must wear electrostatic shoes and often should pay attention not to make the paint block attached to the electrostatic shoes.
6，清洗喷嘴时必须将控制箱的电源开关关闭并将前端接地线后再进行；洗喷嘴时如发生高压静电，会成为火灾的原因。作业中断或作业结束时必须将电源开关关闭。
6, cleaning the nozzle, the control box must switch off the power supply, and the front end of the grounding wire and then; wash the nozzle, such as the occurrence of high voltage static electricity, will become the cause of fire. You must turn off the power switch when the job is interrupted or the job is finished.
7，清洗喷嘴时禁止使用金属刷子：
7, the use of metal brushes is prohibited when cleaning nozzles:
喷嘴时静电喷枪的生命，如使用金属刷子会损伤喷嘴，将不能得到均匀的喷雾状态，所以请使用随机附带的毛刷。
The life of an electrostatic spray gun, such as using a metal brush, will damage the nozzle and will not give a uniform spray state, so use a random brush.
8，静电喷枪本体，高压电缆及软管类，请勿浸泡于溶剂内；静电喷涂机是电气机械，随便浸泡于溶剂内会成为故障原因。
8, electrostatic spray gun body, high voltage cable and hose category, please don't soak in the solvent; electrostatic spraying machine is electrical machinery, soaking in the solvent will be the cause of failure.
9，高压电线及软管类请勿在地上拖拉，尽量吊挂在顶棚或墙壁上（使用静电喷枪时涂料软管要使用橡胶软管等绝缘体吊挂）；高压电缆线及软管类如在地上拖拉，易使其损坏。
9, high voltage wires and pipes on the ground do not drag, hanging on the ceiling or wall as far as possible (using electrostatic spray paint to use rubber hose and hose hanging insulator); high voltage cables and pipes such as dragging on the ground, easy to damage.
10，涂装室内需要安装排气装置（通风管道、排风扇）；
10, the paint room should be equipped with exhaust devices (ventilation ducts, exhaust fans);
11，空气过滤器、空气压缩机等的冷凝水要充分排放：
11, air filters, air compressors and other condensed water should be fully discharged:
空气内有水分时会造成喷涂不良及报警器的蜂鸣、安全回路动作，所以对水分要充分过滤并排放。
When there is moisture in the air, it will cause bad spraying, buzzer buzzing and safety circuit action, so the water should be filtered and discharged.
12，喷嘴前端于被涂物工件的距离一定要保持150mm以上：
12, the nozzle front end of the coating, workpiece distance must be maintained above 150mm:
在构造上，静电喷涂机的喷嘴一般在接近地线时，喷嘴的电位会自动降低，但将涂料泵绝缘使用（金属涂料、木工涂料、水溶剂涂料等电抵抗值的涂料）时，泵的电位不会降低，固有发生大的火花的可能。
In the structure of nozzle, electrostatic spraying machine in the near ground, the nozzle will automatically reduce the potential, but will use insulating paint pump (paint coatings, metal coatings, wood water solvent coatings such as electric resistance value), potential can not reduce the pump, the inherent big flower may fire.
13，如使用绝缘台时要与周围物体相距300mm以上，需要触摸时，要先将控制箱的电源切断并接地后才可触摸；电抵抗值低的涂料于电线通电一样，接触涂料容器时有受到电击的危险；面向通路的场所，必须设置有接地的安全栅，避免一般作业者误触。
13, such as the use of insulation to Taiwan and the surrounding objects are more than 300mm, to touch, to the power supply control box and cut off the ground before they can touch; electrical resistance value is low in an electrical wire coating, coating contact container is in danger of electric shock; path oriented places must be set the safety gate grounding, avoid operator error contact.
14，为预防万一，要常备灭火器。
14, in case of fire, standing fire extinguishers.

上一页静电喷枪的使用方法

下一页液体静电喷枪的好处