| 液体静电喷枪的好处 |
| 添加时间：2017/9/14 16:53:00 浏览次数： |
| 现如今，液体静电喷枪发展非常迅猛，市场应用已十分广泛，先进的喷涂理念是高新技术的产物，让企业生产更便利、更高效。优秀企业已争先恐后采用这一先进喷涂技术。早期因为静电喷枪的局限性，很多产品表面喷涂还不适用这一喷涂技术，随着液体静电喷涂设备企业对于喷涂技术的努力追求，已经慢慢的化解各种难题。很多未涉足过的企业也开始慢慢了解这一先进技术。 Nowadays, the development of liquid electrostatic spray gun is very rapid, and the market has been widely applied. Advanced spraying concept is the product of high and new technology, which makes the production of enterprise more convenient and more efficient. Outstanding enterprises have rushed to adopt this advanced spraying technology. Early because of the limitations of electrostatic spray gun, many products do not apply to the surface coating with liquid spraying technology, electrostatic spraying equipment for spraying technology to pursue, has slowly resolve all kinds of problems. Many companies that have not been involved have begun to understand this advanced technology. 了解液体静电喷枪的好处，首先我们要知道其基础原理。静电喷枪的原理是以接地被涂物为正电极，涂料雾化装装置为负电极，并将涂料雾化装置带高负电压，在二极间制成静电界，使雾化涂料粒子带负电，使涂料有效地被吸着于相反电极的被物面上的方法。这里很重要的一点正负极都必须导电并且接地，如果您需要喷涂的工件不能导电，那就达不到理想的效果，常见的比如塑料产品，可以在电镀之后，或者是为产品表面增加导电油，使其导电。静电喷枪喷涂一般适用于所有导电性材料与涂料。在选择喷涂的时候还是需要综合考虑性价比。 To understand the benefits of a liquid electrostatic spray gun, we first need to know its basic principles. The principle of electrostatic spray gun is ground to be coated as the positive electrode, negative electrode coating atomizing device, and paint atomizing device with high negative voltage, made of electrostatic field in diode, the atomization of the coating particles are negatively charged, the coating was effectively sucked to the opposite electrode is on the surface method. Here is a very important point of positive and negative pole must be conductive and the ground, if not you need to spray the conductive workpiece, it would not reach the ideal effect, such as the common plastic products, can be in after plating, or increase the conductive oil to the surface of the product, so that the conductive. Electrostatic spray gun spraying is generally applicable to all conductive materials and coatings. In the choice of spraying, or the need to consider comprehensively cost-effective. 手动液体静电喷枪喷涂，因其喷涂的涂料能够自行的吸附于工件表面，电场力使其环绕着被涂物，大大的减少了涂料的浪费。喷涂正面，其侧面也能吸附上涂料，低压高雾化效果，涂膜均匀，涂膜质量更好。而手动空气喷枪，需要较大的喷涂压力喷涂，且喷涂距离不能太远，喷涂正面，从侧面飘过的油漆就是浪费，如果喷涂压力与距离没掌握好，手工操作不当，喷涂效果肯定很不理想。很多实际案例证明，应用于连续性喷涂场所，1支静电喷枪是相当于4支手喷枪的效率，节省涂料最少10%以上，另外喷出的涂膜效果更好，省人工，减少了浪费，节约管理成本。从而更好的提供生产率，更好的实现量产。 Manual liquid electrostatic spray gun spraying, because of its spraying paint can be absorbed on the workpiece surface, the electric field force to surround it with coating, greatly reduce the waste of paint. The front surface can be coated with paint, low pressure and high atomizing effect. The coating is even and the coating quality is better. The manual air spray gun, pressure spraying and spraying distance is larger, not too far from the front side of the paint spraying, drifting is a waste, if the spray pressure and the distance did not have a good hand, improper operation, the spraying effect certainly is not ideal. That many practical cases applied in continuous spraying places, 1 electrostatic spray gun is equivalent to 4 hand gun efficiency, paint saving at least 10% or more, also from the film better, save labor, reduce waste, save management costs. In order to better provide productivity, and better achieve mass production. 随着静电喷涂技术的升华再升华，以及工业行业对于绿色环保涂装理念的创新，“减少排放，减少浪费，减少污染”已经是当下生产发展的主题，使用静电喷枪，即可为企业带来“ 优质高产低成本”，又能为社会做贡献。依靠先进的技术创新，实现利益最大化而努力。 With the electrostatic spraying technology and sublimation sublimation, green environmental protection coating for the concept of innovation and industry, "to reduce emissions, reduce waste, reduce pollution" are the theme of the development of production, the use of electrostatic spray gun, can bring the "high quality high yield low cost for the enterprise, but also can make contribution to the society. Rely on advanced technological innovation to achieve maximum benefits. |
| 上一页 静电喷枪喷涂之安全管理 |
| 下一页 静电喷枪操作注意事项 |
Copyright © 技术支持：遨游网络